I am looking to borrow a triangular tool to adjust the water heater setting in the mixing valve. Please let me know if you have it and I shall promptly return it once done.
Thanks
| HawthorneVillager.com http://www.hawthornevillager.com/phpbb/ |
|
| Looking for a triangular tool to adjust water heater setting http://www.hawthornevillager.com/phpbb/viewtopic.php?f=1&t=25764 |
Page 1 of 1 |
| Author: | mz_oakville [ Tue Apr 13, 2010 12:05 pm ] |
| Post subject: | Looking for a triangular tool to adjust water heater setting |
I am looking to borrow a triangular tool to adjust the water heater setting in the mixing valve. Please let me know if you have it and I shall promptly return it once done. Thanks
|
|
| Author: | Mahones [ Tue Apr 13, 2010 1:19 pm ] |
| Post subject: | |
Just use a pair of channel-lock pliers, worked fine for me |
|
| Author: | mz_oakville [ Tue Apr 13, 2010 5:39 pm ] |
| Post subject: | triangular tool |
Mahones wrote: Just use a pair of channel-lock pliers, worked fine for me
yes i tried to do that but did not work because there is very little clearance between the water heater/mixing valve and drywall. pilers just slips off and triangular tool is required. please pm if u have one. tkx |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|