HawthorneVillager.com

We have left the PPH franchise and I have started a new company "Master Post Hole Digger Inc.".

Same Service, Warranty, Crew and Experience! We have been serving the Milton area for close to a decade.

Book before it is too late!

Our Price List for the 2011 Season!


The post services we offer cover all of your post and posthole needs including:
-Digging holes for posts, decks, flag poles
-Setting posts
-Filling and placing sono tubes
-We mix our concrete onsite
-We take care of the locates (Clearance from Bell, Hydro, Cable & Gas)

Our postholes are machine augured and we have virtually eliminated frost heave!
We use a BobCat-Mt-52 for tight spaces and it is equipped with down pressure and will not damage your lawn. Holes can be dug 9" or 12" in diameter up to 4 feet deep.
http://www.bobcat.com/loaders/models/minitrackloader/mt52

Prices:
8 4x4 and under - min. charge 200.00 (includes drilling, setting/concrete, warranty, and locates)
8-15 4x4 - price is 23.00 per hole (drill/set/concrete/warranty/locates)
20 and over 4x4 - 20.00 per hole (drill/set/concrete/warranty/locates)

8-15 6x6 - 26.00 per hole (drill/set/concrete/warranty/locates)
20 and over 6x6 - 24.00 per hole (drill/set/concrete/warranty/locates)

Sono Tube Installation
8 inch (4x4 sits on-top)... 40 per hole... 4 feet, install sono, concrete (make sure all air pockets taken out - much portland is used)... we set the bracket.... we can surface to the ground or can come up a foot...
10 inch... (6x6)... 50.00 per hole
12 inch... (6x6)... 60.00 per hole

If the job is building Inspected... We drill the holes, leave and fill them after the inspector gives the okay!!

We do not supply the sono tube or bracket... You can purchase at Home Depot, Lowes, or Rona...

We don't build but highly recommend 'Security Fence'.
www.SecurityFenceOnline.com
Office: 905.693.1563

We have been setting posts/sono tubes for many years in the Milton area and Security Fence does A+ work!

WE WARRANTY OUR WORK!
MASTER POST HOLE INC.
Cheaper Lumber Quotes Available!
Oakville, Burlington, Milton and Area 905.337.7773
masterposthole@aol.com
Aimee Lyons

bump

Should be somewhere around 42".

Our machine is 37 inches wide.
In regards to our min. charge it includes the concrete, drilling and setting.
For example, you have 6 posts you need installed, that job would be our 200 dollar minimum charge.
Taxes in…

If you only have say 3 (8inch) sono tubes, that job would be our 200 dollar minimum charge. Nothing else added on!

You still need to supply your posts and if you are installing sono tubes, you need to supply the tubes.

Thank-you,

Aimee

Hi Aimee;

I just PM'd you for a quote.

Thx.
P.

_________________
HV, Ph 14b

bump

Still some openings before the Long Weekend!
You can still save the tax!

bump

Bump

Still save the Tax!!

Contact:
MY CODE PPH77
Jim Rego
Brandon Tim Br-Mart
416-298-2551 x:238
mailto:jim@brandontimbrmart.ca

You can look at the wood in Aberfoyle (ouside of Burlington)
100 Canadian wood!

If you find another cheaper price on wood, tell Jim...

bump

bump...
extra month savings on tax...

I need locates, clearance from Bell, Hydro, Cable and Gas.
3-4 working days for them... Maybe weekend if I have clearance or Monday!
Anymore questions or concerns feel free to ask anytime!
Aimee

bump

bump